Home
Flux 3D PyFlux Documentation
All Flux 3D functions and entities
Flux3D Functions
List of all Flux3D functions
loadMacro
Load a macro ...

Welcome
Flux 2D PyFlux Documentation
All Flux 2D functions and entities
Flux 3D PyFlux Documentation
All Flux 3D functions and entities
- Flux3D Entities
  List of all Flux3D entities
- Flux3D Functions
  List of all Flux3D functions
  - 2DViewStandard1
    Set standard view 1
  - aboutFlux
    About Altair Flux...
  - AboutPEEC
    About InCa3D ...
  - activateNextStep
    Activate the next step
  - ActivateSecondApplication
    Activate second application
  - AddVolumeElementsVisualizationBySelectionPlane
    Add to visualization by selection plane
  - adjust
    Adjust intersections
  - advancedModeForElecCut
    Management of cuts in advanced mode
  - advancedModeForMagCut
    Management of cuts in advanced mode
  - assignCoilCondCompToNotMeshedCoils
    Assign coil conductor components to not meshed coils
  - assignGeomTerminalsToCoilCondRegCompletion
    Orient wires to coil conductor regions (completion mode)
  - assignMeshGeneratorToFace
    Assign mesh generator to faces (completion mode)
  - assignMeshGeneratorToVolumes
    Assign mesh generator to volumes (completion mode)
  - assignRegionToFaces
    Assign regions to faces (completion mode)
  - assignRegionToVolumes
    Assign regions to volumes (completion mode)
  - assignTerminalsToSolidCond2TerminalsCompletion
    Assign terminals to solid conductors 2 terminals (completion mode)
  - assignTerminalsToSolidCondNTerminalsCompletion
    Assign terminals to solid conductors (completion mode)
  - AuditScenarioProcedure
    Audit Scenario
  - AutomaticConnexion
    Automatic creation of connections
  - backgroundImage
    Modify the background image size
  - bertottiLossesRegion
    Bertotti iron losses
  - bevel
    Chamfer
  - build3DContourFaceRegion
    Build 3D contours on face regions
  - buildElectricLoopCut
    Automatic creation of cuts
  - buildFaces
    Build faces
  - buildFacesSketcher
    Build faces
  - buildFacesWithOldAlgo
    Building of the faces with old algo
  - buildFacesWithWire
    Build faces with wires
  - buildMagneticCircuitCut
    Automatic creation of cuts
  - BuildProblem
    Build Problem
  - buildVolumes
    Build volumes
  - buildVolumesWithOldAlgo
    Building of the volumes with old algorithm
  - buildvolumesWithWire
    Build volumes with wires
  - checkAllGeometry
    Check geometry
  - checkCircuit
    Check circuit
  - checkGeometry
    Check geometry
  - checkMesh
    Check mesh
  - checkPhysic
    Check physics
  - checkProject
    Check project before solving process
  - checkShellElementsFaceRegion
    Check shell Elements on face regions
  - checkSolver
    Check problem before solving process
  - circleRepetition
    Circular repetition
  - CircuitViewRefresh
    Refresh circuit view
  - CircuitViewZoomAll
    Zoom all
  - CircuitViewZoomInit
    Initial zoom
  - CircuitViewZoomRegion
    Zoom region
  - cleanAllMeshInformation
    Clean all mesh information
  - closeBoxes
    Close all opened dialog boxes
  - closeBPMOverlay
    Leave the "BPM Motor" overlay
  - closeImageImportContext
    Close image import context
  - closeIMDOverlay
    Leave the "IMD Motor" overlay
  - closeIODataContext
    Close the Input/Ouput data context (beta version)
  - closeLibrary
    Fermer librairie...
  - closeMechanicalAnalysisContext
    Close mechanical analysis context
  - closeModelerContext
    Leave the modeler context and return to standard geometry context
  - closeNDTOverlay
    Leave the "NDT Sensor" overlay
  - closePngViewerContext
    Close png viewer
  - closeProject
    Close the current project
  - closeSketcher2dContext
    Close Sketcher2DContext
  - closeSpy
    Close the spy file
  - collectData
    Collect data
  - compileSpy
    Compile a command file
  - computeArrowsCutPlane
    Arrows on cut planes
  - computeArrowsFace
    Arrows on faces
  - computeArrowsGrid2D
    Arrows on 2D grids
  - computeArrowsGrid3D
    Arrows on 3D grids
  - computeArrowsGrid3DBorder
    Arrows on border of 3D grids
  - computeArrowsRegionFace
    Arrows on face regions
  - computeArrowsRegionVolume
    Arrows in volume regions
  - computeArrowsRegionVolumeContour
    Arrows on contours (faces) of volume regions
  - computeBjAllRegions
    Compute the flux density created by current
  - computeBjLineRegions
    Compute the flux density created by current
  - computeBjSurfaceRegions
    Compute the flux density created by current
  - computeBjVolumeRegions
    Compute the flux density created by current
  - computeBoundingBox
    Compute bounding box of problem
  - computeCapacitanceMatrix
    Compute capacitance matrix
  - ComputeCurrentValueParameter
    Current values I/O parameter
  - computeElectricChargeFaceRegion
    Compute electric charge on a perfect conductor face region
  - computeElectricChargeLineRegion
    Compute electric charge on a perfect conductor line region
  - computeElectricChargePointRegion
    Compute electric charge on a point region
  - computeElectricChargeVolumeRegion
    Compute electric charge on a perfect conductor volume region
  - computeEnergyElecMagDomaine
    Compute electromagnetic energy on the domain
  - computeEnergyElecMagFaceRegion
    Compute electromagnetic energy on face regions
  - computeEnergyElecMagLineRegion
    Compute electromagnetic energy on line regions
  - computeEnergyElecMagVolumeRegion
    Compute electromagnetic energy on volume regions
  - computeEnergyElecStatDomaine
    Compute electrostatic energy on the domain
  - computeEnergyElecStatFaceRegion
    Compute electrostatic energy on face regions
  - computeEnergyElecStatLineRegion
    Compute electrostatic energy on line regions
  - computeEnergyElecStatVolumeRegion
    Compute electrostatic energy on volume regions
  - computeFluxCoilConductor
    Compute flux through a coil conductor
  - computeForceElecMagFaceRegion
    Compute electromagnetic force on face regions
  - computeForceElecMagLineRegion
    Compute electromagnetic force on line regions
  - computeForceElecMagVolumeRegion
    Compute electromagnetic force on volume regions
  - computeForceElecStatFaceRegion
    Compute electrostatic force on face regions
  - computeForceElecStatLineRegion
    Compute electrostatic force on line regions
  - computeForceElecStatVolumeRegion
    Compute electrostatic force on volume regions
  - ComputeForceLaplaceFaceRegion
    Compute the Laplace force on face regions
  - ComputeForceLaplaceLineRegion
    Compute the Laplace force on line regions
  - ComputeForceLaplaceVolumeRegion
    Compute the Laplace force on volume regions
  - computeIsolinesCutPlane
    Isolines on cut planes
  - computeIsolinesFace
    Isolines on faces
  - computeIsolinesGrid2D
    Isolines on 2D grids
  - computeIsolinesGrid3D
    Isolines on 3D grids
  - computeIsolinesRegionFace
    Isolines on face regions
  - computeIsolinesRegionVolume
    Isolines on volume regions
  - computeIsovaluesCutPlane
    Isovalues on cut planes
  - computeIsovaluesFace
    Isovalues on faces
  - computeIsovaluesGrid2D
    Isovalues on 2D grids
  - computeIsovaluesGrid3D
    Isovalues on 3D grids
  - computeIsovaluesRegionFace
    Isovalues on face regions
  - computeIsovaluesRegionVolume
    Isovalues on volume regions
  - computeIsovaluesVolume
    Compute isovalues on volumes
  - computeLossesDomaine
    Compute losses on the domain
  - computeLossesFaceRegion
    Compute lossses on face regions
  - computeLossesLineRegion
    Compute losses on line regions
  - computeLossesVolumeRegion
    Compute losses on volume regions
  - ComputePoint
    New session Quantities computation on points
  - computeTorqueElecMagFaceRegion
    Computation of electromagnetic torque on face regions
  - computeTorqueElecMagLineRegion
    Computation of electromagnetic torque on line regions
  - computeTorqueElecMagVolumeRegion
    Computation of electromagnetic torque on volume regions
  - computeTorqueElecStatFaceRegion
    Computation of electrostatic torque on face regions
  - computeTorqueElecStatLineRegion
    Computation of electrostatic torque on line regions
  - computeTorqueElecStatVolumeRegion
    Computation of electrostatic torque on volume regions
  - conge
    Fillet
  - ConnectedGroup
    Check groups of connected conductors
  - ContinueSolvingAuto
    Continue the solving process
  - ContinueSolvingEvol
    Continue the solving process with a variation parameter
  - ContinueSolvingIter
    Continue the solving process on the iteration
  - convertApplicationToMagneticAC
    to Steady State AC Magnetic
  - convertApplicationToMagneticACThermalTransient
    to Steady State AC Magnetic coupled with Transient Thermal 2D
  - convertApplicationToMagneticDC
    to Magneto Static
  - convertApplicationToMagneticTransient
    to Transient Magnetic
  - convertApplicationToThermalSteady
    to Steady State Thermal
  - convertApplicationToThermalTransient
    to Transient Thermal
  - convertPropagated
    Convert propagated entities
  - copy
    Copy
  - CopyCircuitElements
    Copy (Ctrl+C)
  - coverWire
    Cover wires defined by a list of lines
  - CreateCircuitBrushSegment
    Create a new Brush segment
  - CreateCircuitCapacitor
    Create a new Capacitor
  - CreateCircuitCoilConductor
    Create a new Coil conductor
  - CreateCircuitCurrentSource
    Create a new Current source
  - CreateCircuitDiode
    Create a new Diode
  - CreateCircuitGround
    Create a new Ground
  - CreateCircuitInductor
    Create a new Inductor
  - CreateCircuitNTerminalsSolidConductor
    Create a new Solid conductor n terminals
  - CreateCircuitResistor
    Create a new Resistor
  - CreateCircuitSolidConductor
    Create a new Solid conductor 2 terminals
  - CreateCircuitSquirrelCage
    Create a new Squirrel cage
  - CreateCircuitSwitch
    Create a new Switch
  - CreateCircuitVoltageSource
    Create a new Voltage source
  - CreateLSMaterial
    Create LS type material
  - CreateMotor
    Create Motor
  - createTabulatedParameterByImport
    New tabulated I/O parameter by importation of a 2D table
  - CreateTemperature
    New spatial quantity TKelvin for temperature
  - createTransientStartupFile
    Create file for transient startup
  - currentValues
    Current Values
  - curveRegionFace
    Face Region Curve
  - cut
    Cut
  - CutCircuitElements
    Cut (Ctrl+X)
  - defineCoordinatesSystem
    Define coordinates system
  - defineEchelle
    Define echelle
  - defineNextSteps
    Define next steps
  - delete
    Delete
  - DeleteAllResults
    Delete all project results
  - deleteArrows
    Delete Arrows
  - DeleteCircuitElements
    Delete (Del)
  - DeleteCurrentApplication
    Delete current application
  - DeleteCurrentResults
    Delete all results of the project
  - DeleteElectricCircuit
    Delete electrical circuit
  - deleteGeometry
    Delete
  - deleteImage
    Delete image
  - deleteIsolines
    Delete isolines
  - deleteIsovalues
    Delete isovalues
  - deleteMesh
    Delete meshing
  - DeleteMotor
    Delete Motor
  - DeleteProblem
    Delete Problem
  - deleteSelection
    Delete selection
  - DeleteSeveralSteps
    Delete the n last steps
  - DeleteWinding
    Delete Winding
  - disableExecution
    Switch in a writing mode without execution
  - displayArrows
    Display or hide arrows
  - displayArrowsOnMagnet
    Display arrows on magnet
  - displayFormattedFileOption
    Afficher etat fortran de la variable FLUX_FORMATTED_FILE
  - displayIsolines
    Display or hide isolines
  - displayIsovalues
    Display or hide isovalues
  - displayOrHideGrid
    Display or hide grid
  - displayOrHideImage
    Display or hide image
  - displayOrHidePoints
    Display or hide points
  - displayOrHideRepere
    Display or hide coordinate system
  - displayOrHideTable
    Display or hide table
  - drawArc2PointsAngle
    Arc 2 points without center
  - drawArc2PointsRadius
    Arc 2 points with center
  - drawArc3Points
    Arc 3 points
  - drawCircleDiameter
    Circle diameter
  - drawCircleRadius
    Circle center+radius
  - drawLine
    Polyline
  - drawPoints
    Draw points
  - drawRectangle
    Rectangle diagonal
  - drawRectangleCenter
    Rectangle Center
  - drawRefLine
    Reference line
  - drawRefPoint
    Reference point
  - EditCurrentApplication
    Edit current application
  - EditMotor
    Edit Motor
  - enableExecution
    Switch in normal mode with execution
  - errorCriterionRegion
    Error Criterion
  - errorCriterionyRegion
    Error Criterion
  - EvalDemagnetization
    Evaluation of the demagnetization
  - evaluateGeometry
    Evaluate geometry
  - evaluateSensors
    Evaluate sensors
  - executeByteCode
    Run a compiled command file
  - exit
    Close the application
  - export2DGeometryFromAcisFile
    2D Export to a SAT file
  - export2DGeometryFromCatiaV5File
    2D Export to a CATIA V5 file
  - export2DGeometryFromSTEPFile
    2D Export to a STEP file
  - exportCADFromAcisFile
    Export to a SAT file
  - exportCADFromCatiaV4File
    Export to a CATIA V4 file
  - exportCADFromCatiaV5File
    Export to a CATIA V5 file
  - exportCADFromIGESFile
    Export to an IGES file
  - exportCADFromSTEPFile
    Export to a STEP file
  - exportCircuit
    Export circuit to a xcir file
  - exportCircuitToPyFlux
    Export circuit to a PyFlux file
  - exportDXF
    Export geometry to a DXF file
  - exportGeometryFromAcisFile
    Export to a SAT file
  - exportGeometryFromCatiaV4File
    Export to a CATIA V4 file
  - exportGeometryFromCatiaV5File
    Export to a CATIA V5 file
  - exportGeometryFromIGESFile
    Export to an IGES file
  - exportGeometryFromSTEPFile
    Export to a STEP file
  - exportMeshToDEC
    Export mesh to a DEC file (Flux Expert)
  - exportMeshToMED
    Export mesh to a MED file (Available only in version Flux <= 12.3)
  - exportMeshToModulef
    Export mesh to a MODULEF file
  - exportMeshToPF3
    Export mesh to a PF3 file
  - exportMeshToTRA
    Export mesh to a TRA file (Flux2D)
  - exportMeshToUNV1
    Export mesh to an UNV file (IDEAS)
  - ExportNodeCoordRegions
    Export node coordinates of regions
  - ExportNodeCoordSpatialFormula
    Export node coordinates and spatial formula
  - ExportSpatialFormulaOnSupportMultipoint
    Export spatial formula on a multipoint support
  - extendLines
    Extend line
  - faq
    User portal - ALTAIR gate
  - fillHoleWithWireRatio
    Fill a hole with wire
  - fillHoleWithWireThickness
    Fill a hole with wire
  - finalizeCurrentStep
    Finalize the current step
  - fractionate
    Fractionate
  - generateActivateCouplingComponent
    Generate component for Activate coupling
  - generateAmesim3PhaseRotatingMotorComponent
    Generate Amesim component for 3 phase rotating motor
  - generateAmesimGenericComponent
    Generate generic AMESIm component
  - generateAmesimLinearActuatorComponent
    Generate Amesim component for linear actuator
  - generateFirstOrderElements
    Generate first order elements
  - generateGotItCouplingComponent
    Generate component for GOT-It coupling
  - generateHSTCouplingComponent
    Generate component for HyperStudy coupling (for HyperStudy 2019.1 and later)
  - generateMatlabSimulinkCouplingComponent
    Generate component for Matlab Simulink coupling
  - generatePortunusCouplingComponent
    Generate component for Portunus coupling
  - generatePSCADCouplingComponent
    Generate component for PSCAD coupling
  - generateSecondOrderElements
    Generate second order elements
  - generateShellElements
    Generate Shell element
  - getActiveScenario
    Get Active Scenario( in post processing only)
  - getLastTreatedStepStatus
    Get the status of the last processed step
  - getMeshElementsOnDomainFace
    Get mesh Elements on face domain
  - getMeshElementsOnDomainVolume
    Get mesh Elements on Domain
  - getMeshElementsOnRegionFace
    Get mesh Elements on face domain
  - getMeshElementsOnRegionVolume
    Get mesh Elements on Domain
  - getMeshNodesOnRegionFace
    Get nodes on face region
  - getMeshNodesOnRegionVolume
    Get nodes on volume region
  - healAllIntersections
    Heal all intersections
  - healAllSuperpositions
    Heal all superpositions
  - healAndSimplifyAllGeometry
    Heal and simplify all geometry
  - healGeometry
    Automatically heal geometry
  - healingCADGeometryContext
    Enter the "healing" context
  - healingCADToStandardGeometry
    Leave the "healing" context
  - healingFacetGeometryContext
    Enter the "facet geometry" context
  - healingFacetToStandardGeometry
    Leave the "facet geometry" context
  - healingImportCADContext
    Enter the "healing import CAD" context
  - healingImportCADToStandardGeometry
    Return to standard geometry context
  - helpContents
    Help (html documentation)
  - helpIndex
    Index...
  - hideBetaFeatures
    Hide Beta Features (standard mode)
  - horizontalMirror
    Horizontal mirror
  - imageImportRedo
    Redo
  - imageImportUndo
    Undo
  - importCADFromAcisFile
    Import of a SAT file
  - importCADFromCatiaV4File
    Import of a CATIA V4 file
  - importCADFromCatiaV5File
    Import of a CATIA V5 file
  - importCADFromIGESFile
    Import of an IGES file
  - importCADFromProEFile
    Import of a Pro/E file
  - importCADFromSTEPFile
    Import of a STEP file
  - importCircuit
    Import circuit from a xcir file
  - importCircuitFromCCS
    Import circuit from a CCS file
  - importCircuitFromCIF
    Import circuit from a CIF file
  - importCircuitFromTXT
    Import circuit from a TXT file
  - ImportFluxCurve2DFromASCIIFile
    Import a 2D curve - formatted file (txt)
  - ImportFluxCurve2DFromTxtFile
    Import a 2D curve - Flux file (txt)
  - ImportFluxCurve3DFromASCIIFile
    Import a 3D curve - formatted file (txt)
  - ImportFluxCurve3DFromTxtFile
    Import a 3D curve - Flux file (txt)
  - importGeomFromCATIAV4
    Import geometry from a CATIAV4 file
  - importGeomFromCATIAV5
    Import geometry from a CATIAV5 file
  - importGeomFromDXF
    Import geometry from a DXF file
  - importGeomFromDXFAdvanced
    Import geometry from a DXF file (advanced mode)
  - importGeomFromFBD
    Import geometry from a FBD file (FLUX2D)
  - importGeomFromIGES
    Import geometry from an IGES file
  - importGeomFromIGESAdvanced
    Import geometry from a IGES file (advanced mode)
  - importGeomFromInter
    Import geometry from an IF3 file (INTER)
  - importGeomFromInventor
    Import geometry from a Inventor file
  - importGeomFromNX
    Import geometry from a NX file
  - importGeomFromParasolid
    Import geometry from a PARASOLID file
  - importGeomFromProE
    Import geometry from a ProE file
  - importGeomFromSAT
    Import geometry from a SAT file
  - importGeomFromSolidWorks
    Import geometry from a SOLIDWORKS file
  - importGeomFromSTEP
    Import geometry from a STEP file
  - importGeomFromSTEPAdvanced
    Import geometry from a STEP file (advanced mode)
  - importGeomFromSTL
    Import geometry from a STL file
  - ImportGerberLayerPEEC
    Import of a Gerber layer
  - ImportGerberViaPEEC
    Import of Gerber vias
  - importMaterial
    Import material .DAT
  - importMatManager
    Import material from Material Manager
  - importMeshFromHMSLOSNastran
    Import mesh from a HyperMesh/SimLab/OptiStruct (Nastran) file
  - importMeshFromMED
    Import mesh from a MED file (Available only in version Flux <= 12.3)
  - importMeshFromNASTRAN
    Import mesh from a NASTRAN file
  - importMeshFromPATRAN
    Import mesh from a PATRAN file
  - importMeshFromUNV
    Import mesh from an UNV file (IDEAS)
  - importObjectFromFlux
    Import FLUX object
  - importObjectInSketcherFromFlux
    Import FLUX object
  - importPolarizationLaw
    Import polarization law (completion mode)
  - ImportSpatialQuantity
    Import spatial quantity
  - ImportSpeedMotor
    Import Speed Motor
  - initiateCurrentStep
    Initiate the current step
  - integralDomain
    Integral on the domain
  - integralFace
    Integral on face
  - integralLine
    Integral on line
  - integralVolume
    Integral on volume
  - interruptSpy
    Interrupt to write command in file
  - IronLossesPoint
    Iron losses at a point
  - IronLossesRegion
    Computation of iron losses
  - IronLossesRegionPostpro
    Iron losses on regions (postprocessing)
  - LabelLine
    Display line numbers
  - LabelPoint
    Display point numbers
  - LabelTubeLine
    Display tube lines numbers from graphic
  - LabelTubePoint
    Display tube points numbers from graphic
  - leaveOverlay
    Leave overlay
  - linearRepetition
    Linear repetition (matrix)
  - loadMacro
    Load a macro ...
  - loadOverlay
    Load a certified overlay
  - loadProject
    Open an existing project
  - loadUserOverlay
    Load a user overlay
  - lsLossesPoint
    LS iron losses at a point
  - lsLossesRegion
    LS iron losses on regions
  - magnetization
    Magnetization grid activation
  - makeBlendDefeaturing
    Make a blend defeaturing
  - makeChamferDefeaturing
    Make a chamfer defeaturing
  - makeDefeaturing
    Make a defeaturing
  - makeHoleDefeaturing
    Make a hole defeaturing
  - makeParametrizationUniformOnComplexLines
    Make parametrization uniform on complex lines
  - MaterialCurveSuperimposition
    Superimpose material curves
  - merge_lines
    Merge lines
  - mergeAllFacesWithAngle
    Merge all faces with angle
  - mergeAllLinesWithAngle
    Merge all the lines with angle
  - mergeFacesWithStartFace
    Merge faces with angle and a start face
  - mergeLines
    Merge two contiguous lines into one
  - mergeListOfFaces
    Merge a list of faces
  - mergeTwoLinesLists
    Merge two lists of lines
  - meshDomain
    Mesh the domain
  - meshFaces
    Mesh the faces
  - meshLines
    Mesh lines
  - MeshReportPEEC
    Meshing report
  - meshVolumes
    Mesh the volumes
  - meshVolumesOldAlgo
    Mesh volumes (old algo)
  - mesure
    Measure
  - modelerCutObject
    Object cut
  - monitor
    Monitor
  - newProject
    New project
  - openAnimationViewerContext
    Open animation viewer
  - openBPMOverlay
    Brushless Permanent Magnet motor
  - OpenBPMOverlayImport
    Import SPEED motor
  - OpenBpmOverlayNew
    Create new Motor
  - openCircuitDedicatedContext
    Enter the circuit dedicated context
  - openImage
    Open image
  - openIMDOverlay
    Induction motor
  - OpenIMDOverlayImport
    Import SPEED motor
  - OpenImdOverlayNew
    Create new Motor
  - openIODataContext
    Open data Import/Export context
  - openLibrary
    Ouvrir librairie ...
  - openMechanicalAnalysisContext
    Open mechanical analysis context
  - openModelerContext
    Modeler Context
  - openNDTOverlay
    NDT Sensor
  - openSessionMultiPhysicsWithNewScenario
    Multi physic solving session (new scenario)
  - openSketcher2dContext
    Sketcher 2D context
  - openSpy
    Choose the name of the new command file
  - optimMesh
    Optim mesh
  - orientRegSurfMaterial
    Orient material for face region
  - orientRegVolMaterial
    Orient material for volume region
  - paste
    Paste
  - PasteCircuitElements
    Paste (Ctrl+V)
  - powerBalance
    Power Balance
  - Presentations
    Presentations on Altair Flux - TV
  - printGraphicToFile
    Print the active view in a file
  - printGraphicToPrinter
    Print the active view
  - projectFacesOnCoeffPlane
    Project faces on a plane defined by coefficients
  - projectFacesOnCylinder
    Project the faces on a cylinder
  - projectFacesOnStandardPlaneWithAngle
    Project faces on a plane defined by a standard plane and a rotation angle
  - RaiseCriticalError
    RaiseCriticalError
  - RaiseCriticalErrorAndClose
    RaiseCriticalErrorAndClose
  - RaiseCriticalErrorAndExit
    RaiseCriticalErrorAndExit
  - redo
    Redo
  - refreshViewStandard
    Refresh all views
  - reinitCosimulation
    Deleting results and reinitializing the cosimulation
  - ReinitTemperature
    Reinitiliazing spatial quantity TKelvin for temperature
  - removeFormule
    Evaluate parametrized formulas
  - resetCurrentStep
    Reset the current step
  - resizeImage
    Resize image
  - resumeSpy
    Resume to write command in file
  - rotate
    Rotation
  - RotateCircuitElements
    Rotate (R)
  - rotationImage
    Rotate image
  - runPy
    Run a python file with complete GUI refresh
  - runPyInSilentMode
    Run a python file with reduced GUI refresh (faster)
  - runPyInSilentModeAndExit
    Execute a command file in batch mode and exit
  - saveProject
    Save current project
  - saveProjectAs
    Save current project as
  - scaling
    Scaling
  - searchFaceAbnormalEpsilon
    Search abnormal faces with user epsilon
  - searchFacesAbnormal
    Search abnormal faces
  - searchLineFaceIntersection
    Search line-face intersections
  - searchLineLineIntersection
    Search line-line intersections
  - searchLinesAbnormal
    Search abnormal lines
  - SearchLineSuperimposed
    Search superimposed lines
  - searchOpenWires
    Search open wires
  - searchPointsSuperimposed
    Search superimposed points
  - searchSmallLines
    Search abnormal lines with user epsilon
  - Select2DMeshFault
    Select mesh defaults
  - selectAll
    Select All
  - SelectBrushSegment
    Select brush segment components from circuit
  - SelectCapacitiveRegion
    Select capacitive regions
  - SelectCapacitor
    Select capacitor components from circuit
  - SelectCircuitAll
    Free selection
  - SelectCircuitNone
    No selection
  - SelectCoil
    Select non meshed coils
  - SelectCoilConductor
    Select coil conductor components from circuit
  - SelectCompoundPath
    Select compound paths
  - SelectCondBi
    Select bidirectional conductors
  - SelectCondUni
    Select unidirectional conductors
  - SelectConnection
    Select connections
  - SelectConnectionElec
    Select electric connections from circuit
  - SelectCurrentSource
    Select current source components from circuit
  - selectCurrentStep
    Select computation step
  - SelectCutPlane
    Select cut planes
  - SelectDielectric
    Select dielectrics
  - SelectDiode
    Select diode components from circuit
  - SelectElectricCut
    Select electric cut
  - SelectElectricTerminal
    Select electric terminals
  - SelectElementaryData
    Select données élémentaires
  - SelectFace
    Select faces
  - SelectGeomDefect
    Select geometric defects
  - SelectGeomObject
    Select geometric objects
  - SelectGeomObjectSubEntityFace
    Select face sub entities of geometric objects
  - SelectGeomObjectSubEntityLine
    Select edge sub entities of geometric objects
  - SelectGeomObjectSubEntityTop
    Select top sub entities of geometric objects
  - SelectGeomTube
    Select geometric tubes
  - SelectGrid2D
    Select 2D grids
  - SelectGrid3D
    Select 3D grids
  - SelectGround
    Select ground components from circuit
  - SelectInductor
    Select inductor components from circuit
  - SelectLine
    Select lines
  - SelectMagneticCut
    Select magnetic cut
  - SelectNone
    No selection
  - SelectObjet
    Select objects
  - SelectObjet2d
    Select 2D objects
  - SelectPath
    Select paths
  - SelectPoint
    Select points
  - SelectPotentialElec
    Select electric potentials from circuit
  - selectReferencePlane
    Select reference planes
  - selectRefGeomObjectPlane
    Select cut planes
  - SelectRegLin
    Select line regions
  - SelectRegPonct
    Select point regions
  - SelectRegSurf
    Select face regions
  - SelectRegVol
    Select volume regions
  - SelectResistor
    Select resistor components from circuit
  - SelectSegmentElec
    Select electric segments from circuit
  - SelectSolidConductor2Terminals
    Select 2 terminals solid conductor components from circuit
  - SelectSolidConductorNTerminals
    Select N terminals solid conductor components from circuit
  - SelectSquirrelCage
    Select squirrel cage components from circuit
  - SelectStreamers
    Select Streamers
  - SelectSwitch
    Select switch components from circuit
  - SelectTerminal
    Select terminals
  - SelectTubeLine
    Select tube lines
  - SelectTubePoint
    Select tube points
  - SelectVoltageSource
    Select voltage source components from circuit
  - SelectVolume
    Select volumes
  - SetDynamicRotation
    Allow to rotate around picked points or not (CTRL to invert it)
  - SetInvisibleParasiticCapacitances
    Set invisible all parasitic capacitances
  - SetNeutralApplication
    Set neutral application
  - showHideComponentsLabel
    Show or hide components label
  - showHidePotentialsLabel
    Show or hide potentials label
  - simplifyAllGeometry
    Simplify all lines
  - simplifyEllipses
    Automatically simplify ellipses
  - simplifyGeometry
    Automatically simplify geometry
  - simplifyLines
    Simplify lines
  - sketcherZoomAll
    Zoom all
  - skinDepth
    Skin depth computation
  - Solve
    Solve the problem
  - solveCosimulation
    Solving the cosimulation
  - solveCurrentStep
    Solve the current step
  - SolveFromBDPEEC
    Solve
  - SolveFromSOLPEEC
    Solve from SOL file
  - SolveNDT
    Solve NDT problem
  - SolvePEEC
    Solve
  - solveSeveralSteps
    Solve several steps
  - SolveWithDefect
    Solve with defect
  - SolveWithoutDefect
    Solve without defect
  - SolveWithoutRemeshingPEEC
    Solve without remeshing
  - SpatialCurveSuperimposition
    Superimpose 2D curves (path)
  - StopSolving
    Stop the solving process
  - structureFace
    Structure faces for mapped mesh (completion mode)
  - switchAxisVisibility
    Display axis
  - switchBackgroundVisibility
    Display background image
  - switchDefautVisibility
    Display geometric defects
  - switchGeometryLinesVisibility
    Display geometry lines
  - switchGeometryPointsVisibility
    Display geometry points
  - switchGridVisibility
    Display grid
  - switchPointsVisibility
    Display points
  - switchReferencesVisibility
    Display reference lines and points
  - switchReperesVisibility
    Display coordinate systems
  - symetry
    Symmetry
  - translate
    Translation
  - VariationCurveSuperimposition
    Superimpose 2D curves (I/O parameter)
  - vectorRepetition
    Linear repetition (vector)
  - verticalMirror
    Vertical mirror
  - ViewDirection
    Set the view direction
  - ViewFourSights
    Set/reset 4 views mode
  - ViewLight
    Switch on or off the light
  - ViewOpposite
    Set opposite view
  - ViewReverseVideo
    Reverse video
  - ViewStandard1
    Set standard view 1
  - ViewStandard2
    Set standard view 2
  - ViewXPlane
    Set X plane view
  - ViewYPlane
    Set Y plane view
  - ViewZPlane
    Set Z plane view
  - waitForFile
    Wait action on file
Flux SKEW PyFlux Documentation
All Flux Skew functions and entities
Flux PEEC PyFlux Documentation
All Flux PEEC functions and entities

loadMacro

Load a macro ...

Syntax

loadMacro(fileName)

Parameters

fileName : Name of the macro directory - [1..1] String

Returns

No return value