2024
Prepare your model and run the simulation.
Prepare your model for a general AcuSolve simulation.
Define output conditions, run the simulation, and view the results.
Define probe points and rakes, surface monitors, and volume monitors.
View new features for HyperMesh CFD 2024.
Learn the basics and discover the workspace.
Discover HyperMesh CFD functionality with interactive tutorials and community resources.
Solution-centric workflows allow you to traverse through modeling environments using a dedicated UI layer.
Create, open, import, and save models.
Use the Convert tool to convert entire models between data types.
Manage CAD, FE, and 2D parametric sketch geometry.
Generate surface/volume mesh by defining mesh controls, or interactively create and edit 2D surface mesh.
Set up the simulation model, materials, domains, and boundaries.
Define radiation conditions and create emissivity models.
Define direct, derived, and constrained mesh motion.
Use the Probe tool to monitor time history data on defined points at specific time intervals.
Surface monitors for all defined boundaries are created automatically. However, additional surface monitors can be created using the Surfaces tool.
Volume monitors for all defined domains are created automatically. However, additional volume monitors can be created using the Volumes tool.
Define nodal output for the entire model.
Define nodal initial conditions for the simulation. You can define nodal initial conditions on the nodes of selected surfaces and solids, nodes within zones, and nodes of solids on the side of a plane.
Run AcuSolve, track solver and meshing jobs, and plot run time data.
AcuTrace is particle tracer that runs as a post-processor to AcuSolve.
Prepare your model for wind tunnel analysis using ultraFluidX.
Post-process the simulation results by creating visualizations and measurements.
Automate simulation processes with templates and utility scripts.
Once the baseline model is prepared, you can define morph volumes, morph geometry, create design shapes and run DOE studies. These tool work for both AcuSolve and ultraFluidX-based workflows.
More resources for AcuSolve and ultraFluidX solvers.
View All Altair HyperWorks Help
