Show, Hide, and Isolate Entities

Show, Hide, and Isolate Using Context Menus

Display control options are available in most context menus. In general, the options are dependent on the whether or not there is a selection.

Note: The following display options do not apply to all entity types. Only valid selections for the current entity type are displayed in the menu.

Hide: Hides selected entities.
Hide All: Hides all entities of the same type as the entity selector.
Hide Model: Hides the entire model.
Hide All Off Screen: Hides all entities located outside of the modeling window but in currently displayed collectors.
Show: Shows selected entities.
Show All: Shows all entities of the same type as the entity selector.
Show Adjacent: Shows the entities adjacent to your selection or all adjacent entities that are the same type as the entity selector.
Show Model: Shows the entire model.
Show All On Screen: Shows all entities located outside of the modeling window but in currently displayed collectors.
Isolate: Isolates selection and turns off the display of all other entities, regardless of type.
Isolate Entity: Works locally within a specific entity type; for example, if component(s) are isolated, then all display states of other entities, such as load collectors, are unaffected. Isolate Entity displays only the selected entities, and turns off all other entities of the same type.
Isolate Displayed: Isolates all entities of the same type as the entity selector.
Reverse Displayed: Reverses the display of the entity type in the entity selector. If the All filter is active it reverses the display of all the entity types.
Reverse Selected: Reverses the display of the selected entities.
Unhide: Unmasks all entities in the currently displayed collectors.

Show and Isolate Nearby Entities

Restriction: Only available in HyperMesh

Supported source entities: Nodes, elements, components, systems, vectors, loads, and equations.

Supported target entities: Elements, components, systems, vectors, loads, and equations.

Define settings for showing and isolating nearby entities.
1. Select valid source entities.
2. In the modeling window, right-click and select More > Nearby Options from the context menu.
  The Nearby Settings dialog opens.
3. Define a search tolerance radius.
4. Select whether to show or isolate nearby entities from the drop-down menu.
5. Use the check boxes to select the target entities types that are acted upon.
6. Close the dialog.
Select valid source entities.
In the modeling window, right-click and select More > Find Nearby from the context menu.
The target entities defined in the settings dialog are shown/isolated.

Show, Hide, and Isolate in Browsers Using Context Menus

Left-click on an entity or a folder and select the Show/Hide/Isolate context menu option to show, hide, or isolate entities, respectively. Context menu options are available only for graphical entities.

Show and Hide in Browsers Using Icons

Left-click on an entity's icon in a browser to switch between showing or hiding the entity. When an entity is hidden, it appears grayed out in the browser.

For certain entities, such as components and load collectors, you can control the display of both the geometry and the mesh. Click

to show/hide geometry and

to show/hide mesh.

Show, Hide, and Isolate in the Modeling Window Using Context Menus

After selecting an entity in a graphic, left-click to select the Show/Hide/Isolate context menu option to show, hide, or isolate entities, respectively.

Show, Hide, and Isolate Using the Show/Hide Tool

Activate the Show/Hide tool on the View Controls toolbar.
Select entities to show or hide.

HyperMesh and HyperView

Activate or deactivate the check boxes in the microdialog.
The microdialog lists the available entity types in your model that you can show/hide. A selected check box indicates that all of the entities of that type are displayed. A check box with a line indicates some of the entities of that type are displayed, but not all. An empty check box indicates that there are no entities of that type displayed.
Tip: Click All/None/Only to quickly change the display state of multiple entity types.
Figure 3.
Use the Show/Hide guide bar for more precise control.
1. Select an entity type using the entity selector.
2. Click to define the following options.
  
  Furthest to closest
  
  When showing hidden entities, pick from furthest to closest in depth. Turning off this option will pick closest first.
  
  Sync with Browser
  
  Sync selection with browser.
3. Left-click entities to hide them, Shift + left-click to show them, or use of the show/hide icons on the guide bar.
  
  Show all of the current entity type.
  
  Show none of the current entity type.
  
  Reverse the display of the current entity type.
  
  Isolate selection only or all of the current entity type.

HyperGraph

Left-click entities to hide them, Shift + left-click to show them, or use of the show/hide icons on the guide bar.

MotionView

Left-click entities to hide them or use of the show/hide icons on the guide bar.

MediaView

Simply activate or deactivate displayed entity types.

Keyboard Shortcuts and Mouse Controls

HyperMesh


To do this	Press
Enter and exit the Show/Hide tool	D
Show selection If there is no selection, show all of the current entity type	A
Show entire model	Shift + A
Hide selection If there is no selection, hide all of the current entity type	H
Hide and clear selection (Idle mode only)	Ctrl + H
Isolate selection and turn off all other entity types If there is no selection, isolate the current entity type	I
Isolate selection and retain all other entity types (Show/Hide tool only)	Shift + I Middle Mouse Click Tip: Middle mouse click again to reverse the isolated display. This is useful if you want to append to your selection and isolate more entities.
Show entities adjacent to selection If there is no selection, show adjacent entities that are the same type as the entity selector (Idle mode only)	J
Reverse display of selection If there is no selection, reverse the display of the current entity type	R
Switch the display from mesh only, geometry only, or both (Idle mode only)	G
Toggle on/off IDs of a selection (Idle mode only)	Q

Tip: To show elements only, press E to switch the entity filter to elements, then I/Shift + I to isolate all displayed elements. To add loads to the display, press L to switch to loads, then A to show.

HyperView


To do this	Press
Show all	A
Hide selection	H
Isolate selection	I Middle Mouse Click (Show/Hide tool only)
Reverse display	R
Show adjacent entities to selection	J
Enter and exit the Show/Hide tool	D
Show none (Show/Hide tool only)	N

HyperGraph


To do this	Press
Show all	A
Isolate selection	I
Reverse display	R

MotionView


To do this	Press
Show all	A
Hide selection	H
Isolate selection	I
Reverse display	R
Reverse selection	Ctrl + R