Home
Composites
HyperMesh composites modeling.
Pre-Processing
Pre-processing in HyperMesh.
Workflow
Examples of a typical workflow that can be followed to create a composite model in HyperMesh. The order of steps provided does not need to be strictly followed but should be used as a template.
Stack Direction
Stacking direction of plies in a laminate.

Welcome
What's New
View new features for Altair HyperWorks 2024.
Get Started
Learn the basics and discover the workspace.
Tutorials
Learn more about the Altair HyperWorks suite of products with interactive tutorials.
Startup Procedures and Customizations
Start and configure the applications.
Tool Finder
View a list of deprecated panels and their newer, equivalent workflows.
Manage Files and Data
Create, open, import, and save models.
Sessions and Report Templates
Set up sessions and create report templates.
Interface with External Products
Solver interfaces supported in HyperMesh.
Entities and Solver Interfaces
A solver interface is made up of a template and a FE-input reader.
Browsers
Browsers provide a structured view of model data, which you can use to review, modify, create, and manage the contents of a model. In addition to visualization, browsers offer features like search, filtering, and sorting, which enhance your ability to navigate and interact with the model data.
Sketching
Create and edit 2D parametric sketch geometry.
Topology
Create, edit, and cleanup geometry.
FE Geometry
FE geometry is topology on top of mesh, meaning CAD and mesh exist as a single entity. The purpose of FE geometry is to add vertices, edges, surfaces, and solids on FE models which have no CAD geometry.
Meshing and Elements
Explore the different types of mesh you can create in HyperMesh and create and edit 0D, 1D, 2D, and 3D elements.
Model Build and Assembly
Create, organize and manage parts and subsystems.
Composites
HyperMesh composites modeling.
- Pre-Processing
  Pre-processing in HyperMesh.
  - Overview
    An introduction to composites terminology and modeling methods.
  - Workflow
    Examples of a typical workflow that can be followed to create a composite model in HyperMesh. The order of steps provided does not need to be strictly followed but should be used as a template.
    - Stack Direction
      Stacking direction of plies in a laminate.
    - Reference Orientation
      Reference orientation of plies.
    - Materials
      Material definition.
    - Plies and Laminates
      Composite shell model definition.
    - Draping
      Drape simulation.
    - Data Conversion
      Conversion between ply-based and zone-based models.
    - Visualization
      Tools for visualizing orientations, ply shapes and ply layers.
    - Data I/O
      Import and export composite data.
  - Composite Browser
    Use the Composite Browser to create, organize, and manage composite modeling data.
  - Entities
    Entities that comprise composite parts.
  - Tools
    Utilities for working with composite models.
  - Injection Mold Mapping
    Use the Injection Molding ribbon to facilitate the development of accurate structural simulation models for reinforced injection molded parts and assemblies.
- Traditional Methods
  Composite stress toolbox functionality which supports calculation of engineering constants, compliance and stiffness matrices, parameterized joint and panel analysis, and other traditional hand-calculation methods.
- Multiscale Analysis
  Development of multiscale and single scale material models and simulation of parts manufactured from any heterogeneous and homogenous material.
Connectors
Create connections between parts of your model.
Morph
Rapidly change the shape of the FE mesh without severely sacrificing the mesh quality.
Skeleton Modeling
Create a reduced ordered model to facilitate optimization at the concept phase.
Design Space
Workflow to support topology optimization model build and setup.
Optimization
Setup an Optimization in HyperMesh.
Design Explorer
Multi-disciplinary design exploration and optimization tools.
Validate
Validate the model built before running solver analysis.
Analyze
Models require loads and boundary conditions in order to represent the various physics and/or physical equivalents to bench and in-use testing.
Axisymmetry
Reduce a full 3D model with axisymmetric surfaces while accounting for imperfections.
Concept Modeling
Tools and workflows that are dedicated to rapidly creating new parts for specific use cases, or amending existing parts. The current capabilities are focused on stiffening parts.
Crash and Safety
Tools used for crash and safety analysis.
Airbag
Use airbag folder utilities and export a resulting airbag in a Radioss deck.
Aerospace
Essential utility tools developed using HyperMesh-Tcl.
Aeroelasticity
Import an aeroelastic finite element model with Nastran Bulk Data format.
Certification
Framework to plug certification methods to assess margin of safety from the model and result information.
PhysicsAI
Use PhysicsAI to build fast predictive models from CAE data. PhysicsAI can be trained on data with any physics or remeshing and without design variables.
Results Data
Results data can be post-processed using both HyperMesh and HyperView.
Developer
The Developer ribbon contains tools for automation and customization.
Plot Data
HyperGraph is a data analysis and plotting tool with interfaces to many file formats.
Multibody Modeling
MotionView is a general pre-processor for Multibody Dynamics.
Media Files
MediaView plays video files, displays static images, tracks objects, and measures distances.
Tabulate Results
Use TableView to create an Excel-like spreadsheet.
Text Files
TextView math scripts reference vector data from HyperGraph windows to automate data processing and data summary.
Publishing and Reporting
Create, define, and export reports.
Collaboration Tools
Explore, organize and manage your personal data, collaborate in teams, and connect to other data sources, such as corporate PLM systems to access CAD data or publish simulation data.

Stack Direction

Stacking direction of plies in a laminate.

The stacking direction of plies in a laminate is determined by element normals for both ply-based and zone-based models. Element normals can be set from the Material Reference Orientation dialog available from the Composite Browser.

Refer to Material Reference Orientation for further details.

The following images show the laminate stacking direction for a given element normal.