Home
Connectors
Create connections between parts of your model.
Realizations
View details for different types of realizations.
Fastener Connector Realization Types
A list of realization types that can be specified for fastener connectors.
bolt (cylinder bar)

Welcome
What's New
View new features for Altair HyperWorks 2024.
Get Started
Learn the basics and discover the workspace.
Tutorials
Learn more about the Altair HyperWorks suite of products with interactive tutorials.
Startup Procedures and Customizations
Start and configure the applications.
Tool Finder
View a list of deprecated panels and their newer, equivalent workflows.
Manage Files and Data
Create, open, import, and save models.
Sessions and Report Templates
Set up sessions and create report templates.
Interface with External Products
Solver interfaces supported in HyperMesh.
Entities and Solver Interfaces
A solver interface is made up of a template and a FE-input reader.
Browsers
Browsers provide a structured view of model data, which you can use to review, modify, create, and manage the contents of a model. In addition to visualization, browsers offer features like search, filtering, and sorting, which enhance your ability to navigate and interact with the model data.
Sketching
Create and edit 2D parametric sketch geometry.
Topology
Create, edit, and cleanup geometry.
FE Geometry
FE geometry is topology on top of mesh, meaning CAD and mesh exist as a single entity. The purpose of FE geometry is to add vertices, edges, surfaces, and solids on FE models which have no CAD geometry.
Meshing and Elements
Explore the different types of mesh you can create in HyperMesh and create and edit 0D, 1D, 2D, and 3D elements.
Model Build and Assembly
Create, organize and manage parts and subsystems.
Composites
HyperMesh composites modeling.
Connectors
Create connections between parts of your model.
- Connector Browser
  Use the Connector Browser to view and modify connectors in the current model.
- Define Connector Controls
  Use the Control Manager to create and edit the various types of controls that will be used later when realizing connectors.
- Create and Realize Connectors
  Use the tools in the Create tool set to create connectors, assign controls, and realize.
- Apply Mass
  Create a dummy connector entity to add mass to a part, or create areas of mass to represent parts not present in the CAD or FE data.
- Connector Quality Check
  Use the Quality controller to perform various checks on connectors and realized FE.
- FE Absorb Connectors
  Use the FE Absorb tools to create connectors from existing mesh that meet specific types of realizations.
- Realizations
  View details for different types of realizations.
  - Point Connector Realization Types
    A list of realization types that can be specified for point connectors.
  - Fastener Connector Realization Types
    A list of realization types that can be specified for fastener connectors.
    - bolt (2 cylinder rigid)
      Creates a RBODY per part with the center nodes connected to the SPRING2N element.
    - bolt (BEAM44)
      Creates a body with element type ‘Beam44’ element.
    - bolt (CBAR)
      Creates RBE2 elements for the head and CBAR element for the body.
    - bolt (LINK10)
      Creates a body with element type ‘Link10’ element.
    - bolt (b31)
      Creates KINCOUP elements for the head and B31 element for the body.
    - bolt (collapse Rigid)
      This realization creates a single RBE2 element for the body.
    - bolt (cylinder bar)
    - bolt (cylinder rigid)
    - bolt (cylinder spring)
      Creates an RBODY elements and a zero length SPRING2N element.
    - bolt (general)
    - bolt (Metal Clip)
      The bolt (metal clip) creates elements, systems, and configurable body elements that connect a clip location.
    - bolt (solid)
    - bolt (spider)
    - bolt (step hole)
    - bolt (threaded step hole)
      Connects two solids through holes, or connects one solid through a hole with a solid blind hole.
    - bolt (washer 1 alt) LINK10
      Creates CERIG element for the head and LINK10 element for body.
    - bolt (washer 1 alt)
      Creates RBE2 (Nastran/OptiStruct) or KINCOUP (Abaqus) elements for the head and body.
    - bolt (washer 1) BEAM44
      Creates CERIG elements for the head and BEAM44 element for the body.
    - bolt (washer 1) LINK10
      Creates CERIG element for the head and LINK10 for body.
    - bolt (washer 1) cbar
      Creates RBE2 (Nastran/OptiStruct) or KINCOUP (Abaqus) elements for the head and CBAR (Nastran/OptiStruct) or B31 (Abaqus) element for the body.
    - bolt (washer 1)
      Creates RBE2 (Nastran/OptiStruct) or KINCOUP (Abaqus) elements for the head and body.
    - bolt (washer 2 alt)
      Creates RBE2 (Nastran/OptiStruct) or KINCOUP (Abaqus) elements for the head and the body.
    - bolt (washer 2) LINK10
      Creates CERIG elements for the head and the LINK10 element for body.
    - bolt (washer 2)
      Creates RBE2 (Nastran/OptiStruct) or KINCOUP (Abaqus) elements for the head and the body.
    - clip (washer nodes)
      Creates a single RBE2 element for the body.
    - clip
    - ConNode (spider)
      Creates a ConNode rigidlink element for the body.
    - HC cylinder rigid bolt
      This realization creates a single ConNode rigidlink element (LS-DYNA) or RBE2 (Radioss) for the body, and projects and connects to nodes of the adjoining shell/solid within the prescribed cylinder diameter, L1 (cylinder height along the vector from the connector location) and L2 (cylinder height in the opposite direction of the vector from the connector location).
    - HC cylinder spring bolt
    - hinge (b31)
      Creates KINCOUP elements for the head and B31 element for the body.
    - hinge
    - RgdBody (spider)
      Creates a RgdBody rigidlink element for the body.
    - RgdBody (spider + washer)
      Creates a RgdBody rigidlink element for the body.
    - wagonwheel
      This realization creates RBE2 elements for the body, and projects and connects to the hole edge nodes with RBE3 elements.
  - Line Connector Realization Types
    A list of realization types that can be specified for line connectors.
  - Area Connector Realization Types
    A list of realization types that can be specified for area connectors.
- Element Organization
  Organize elements in the Browser Configuration dialog.
- FE Configuration File
  The FE configuration file (feconfig.cfg) is used to define custom welds such as ACM (Area Contact Method) and other special types.
- Attachments and Connectors
  Attachments are an entity to facilitate the ease of joining subsystems.
- Connector Tools
  Use the Connector tools to further define connections between components.
- CAD Abstraction
  Abstract information incoming from the CAD hierarchy to robustly create connectors.
Morph
Rapidly change the shape of the FE mesh without severely sacrificing the mesh quality.
Skeleton Modeling
Create a reduced ordered model to facilitate optimization at the concept phase.
Design Space
Workflow to support topology optimization model build and setup.
Optimization
Setup an Optimization in HyperMesh.
Design Explorer
Multi-disciplinary design exploration and optimization tools.
Validate
Validate the model built before running solver analysis.
Analyze
Models require loads and boundary conditions in order to represent the various physics and/or physical equivalents to bench and in-use testing.
Axisymmetry
Reduce a full 3D model with axisymmetric surfaces while accounting for imperfections.
Concept Modeling
Tools and workflows that are dedicated to rapidly creating new parts for specific use cases, or amending existing parts. The current capabilities are focused on stiffening parts.
Crash and Safety
Tools used for crash and safety analysis.
Airbag
Use airbag folder utilities and export a resulting airbag in a Radioss deck.
Aerospace
Essential utility tools developed using HyperMesh-Tcl.
Aeroelasticity
Import an aeroelastic finite element model with Nastran Bulk Data format.
Certification
Framework to plug certification methods to assess margin of safety from the model and result information.
PhysicsAI
Use PhysicsAI to build fast predictive models from CAE data. PhysicsAI can be trained on data with any physics or remeshing and without design variables.
Results Data
Results data can be post-processed using both HyperMesh and HyperView.
Developer
The Developer ribbon contains tools for automation and customization.
Plot Data
HyperGraph is a data analysis and plotting tool with interfaces to many file formats.
Multibody Modeling
MotionView is a general pre-processor for Multibody Dynamics.
Media Files
MediaView plays video files, displays static images, tracks objects, and measures distances.
Tabulate Results
Use TableView to create an Excel-like spreadsheet.
Text Files
TextView math scripts reference vector data from HyperGraph windows to automate data processing and data summary.
Publishing and Reporting
Create, define, and export reports.
Collaboration Tools
Explore, organize and manage your personal data, collaborate in teams, and connect to other data sources, such as corporate PLM systems to access CAD data or publish simulation data.

bolt (cylinder bar)

Restriction: Available in Abaqus, Nastran, and OptiStruct.

Abaqus

Creates a B31 element for the body and KINCOUP elements for the head elements.

Nastran and OptiStruct

Creates a CBEAM element for the body and RBE2 elements for the head elements.

This realization uses the prop_cylinder.tcl property script.